|
.gif) Introduction
A modern and
high performance replacement window range for domestic steel windows
offering the same aesthetic elegance but vastly increased performance over
original Crittall Windows to
meet the current stringent Building Regulations. The range is suitable for
replacing existing domestic steel windows, new build domestic applications
such as extensions and light commercial projects where cost is a
consideration. Available in a vast standard size range (for lowest
pricing) or purpose made sizes. Available in high performance double
glazed format (24mm units). A
large range of quality modern or traditional ironmongery can be fitted and
the system includes many opening window types which are detailed in the
below table.
This range is not suitable for
fire rated applications at present due to the aluminium beads used (contact
our technical department if fire rated windows are required).
Specification
Windows and doors will be manufactured from the
EB24 range of
purpose-made hot-rolled mild steel section and generally manufactured in
accordance with procedures laid down in BS.6510:1984. All frames will
have welded corners and be flat and square and within normal
manufacturing dimensional tolerances of +/- 2mm. Intermediate glazing bars
will be hot tenon riveted.
Galvanizing
All windows and doors,
including any steel attachments, coupling members or ancillary items, will
be hot-dip galvanised after manufacture to BS.729:1971 (1986), with a
minimum coating weight of 460gsm.
Polyester Powder
Coating (optional)
Galvanised windows and doors can be polyester powder coated using
Syntha-Pulvin powder. The powder will be in accordance with
BS.6497:1984, to an average thickness of at least 60 microns on all
significant surfaces. Colour of polyester powder coated elements
can be any single standard RAL reference colour.
Weatherstripping
Ventilators will be weatherstripped with
Black coloured polymer rubber gaskets secured with
suitable adhesive.
Bead Glazing
Glazing secured via external profiled extruded aluminium beads which locate
into frame carrier sections. Glazed using
setting blocks and capped internally and externally with low modulus
silicone sealant to a colour sympathetic to frame colour.
Alternatively, Silicone can be colour matched to
frames for an additional charge.
All
beads finished as window
frames (except mill finished aluminium with galvanised finished steel
frames).
Glass
All
glass will be hermetically sealed double glazing units of 24mm
thickness. Units generally comprise inner and/or outer pane of 4mm or
6mm. An almost limitless combination of toughened / laminated / obscured /
special / hard coat low "E" / soft coat low "E" inside / outside
panes can be utilised.
Heat Loss
EB24 range double glazed
windows and doors have a typical "u" value of 2.1 W/m2K with soft
coat low
"E" coated argon gas filled double glazing units.
The EB24 range therefore meets the
requirements of Part L of the Building Regulations 1st April 2002 in respect
of the Conservation of Fuel and Power.
Please note that this is only a summary of the range and that all technical
and specification details, photographs etc. can be produced upon request.
|
Frame
Type (*) |
(Width) x (Height) x max. perimeter
(mm) |
Air / Water / Wind /
Exposure Category (Pa) |
(*) o/o=open out o/i=open in.
Where enhanced safety, security, thermal or weather performance is
required - tighter limitations are required. 2 locking points
(in lieu of 1) are required to opening lights over 1200mm wide and/or
1500mm high. Our office would be pleased to advise on windows
outside of stated limits. Test pressure class and exposure
category are of typical types and sizes when tested to BS 5368 and
classified as BS 6375:Part1. |
|
Fixed Light
Side Hung o/o
Top Hung o/o
Single o/o Door
Double o/o Door |
(300-1800) x
(300-1800) x 7200
(300-600) x (300-1300) x 3800
(300-1800) x (300-1300) x 4800
(475-900) x (2000-2100) x
6000
(950-1250) x (2000-2100) x 6600 |
600 / 300 /
2400 / 2400 spl
300 / 200 / 2000 / 2000
300 / 200 / 2000 / 2000
n/av / n/av / n/av / n/av
n/av
/ n/av / n/av / n/av |
|