Open printable version

EB24 Range

Introduction  A modern and high performance replacement window range for domestic steel windows offering the same aesthetic elegance but vastly increased performance over original Crittall Windows to meet the current stringent Building Regulations. The range is suitable for replacing existing domestic steel windows, new build domestic applications such as extensions and light commercial projects where cost is a consideration.  Available in a vast standard size range (for lowest pricing) or purpose made sizes.  Available in high performance double glazed format (24mm units).  A large range of quality modern or traditional ironmongery can be fitted and the system includes many opening window types which are detailed in the below table.  This range is not suitable for fire rated applications at present due to the aluminium beads used (contact our technical department if fire rated windows are required).
 
Specification  Windows and doors will be manufactured from the EB24 range of purpose-made hot-rolled mild steel section and generally manufactured in accordance with procedures laid down in BS.6510:1984. All frames will have welded corners and be flat and square and within normal manufacturing dimensional tolerances of +/- 2mm. Intermediate glazing bars will be hot tenon riveted.
 
Galvanizing  All windows and doors, including any steel attachments, coupling members or ancillary items, will be hot-dip galvanised after manufacture to BS.729:1971 (1986), with a minimum coating weight of 460gsm. 
 
Polyester Powder Coating (optional)    Galvanised windows and doors can be polyester powder coated using Syntha-Pulvin powder. The powder will be in accordance with BS.6497:1984, to an average thickness of at least 60 microns on all significant surfaces.  Colour of polyester powder coated elements can be any single standard RAL reference colour. 
 
Weatherstripping  Ventilators will be weatherstripped with Black coloured polymer rubber gaskets secured with suitable adhesive. 
 
Bead Glazing  Glazing secured via external profiled extruded aluminium beads which locate into frame carrier sections.  Glazed using setting blocks and capped internally and externally with low modulus silicone sealant to a colour sympathetic to frame colour.  Alternatively,    Silicone can be colour matched to frames for an additional charge.  All beads finished as window frames (except mill finished aluminium with galvanised finished steel frames).   
 
Glass  All glass will be hermetically sealed double glazing units of 24mm thickness.  Units generally comprise inner and/or outer pane of 4mm or 6mm.  An almost limitless combination of toughened / laminated / obscured / special / hard coat low "E" / soft coat low "E"  inside / outside panes can be utilised.
 
Heat Loss  EB24 range double glazed windows and doors have a typical "u" value of 2.1 W/m2K with soft coat low "E" coated argon gas filled double glazing units.   The EB24 range therefore meets the requirements of Part L of the Building Regulations 1st April 2002 in respect of the Conservation of Fuel and Power.
 
Please note that this is only a summary of the range and that all technical and specification details, photographs etc. can be produced upon request.